Product Description

Materials needed to make steel plates
1. Steel plates
• High-quality carbon steel plates: low carbon content, soft steel, easy to process later, such as etching, engraving, etc. This type of steel plate has good flatness and toughness, can withstand a certain amount of pressure, and is a common basic material for making pad printing steel plates.

• Stainless steel plates: For some pad printing steel plates that require high precision and high durability, stainless steel plates are a good choice. For example, 304 stainless steel plates have good corrosion resistance, can maintain good chemical stability during etching, and have a high surface finish, which is conducive to the adhesion and transfer of ink, and are suitable for making pad printing steel plates for long-term use or in harsh environments.

2. Plate making materials

• Etching solution:

Ferric chloride etching solution: It is a commonly used acidic etching solution. In the process of making pad printing steel plates, it is used to etch the unwanted parts of the steel plate to form a printed pattern. It can react chemically with the iron in the steel plate to dissolve the metal in the non-pattern area. The concentration of the etching solution and the etching time need to be adjusted according to factors such as the material, thickness and complexity of the pattern of the steel plate.
Ferric chloride etching solution has a slow etching speed and has certain temperature requirements.

Nitric acid etching solution: Nitric acid has strong oxidizing properties and can also be used for etching steel plates. Its etching speed is relatively fast, but the control requirements of the etching process are high, because nitric acid is highly corrosive, which can easily lead to excessive etching or damage to other parts of the steel plate. It is generally used in situations where etching accuracy is high, the pattern is complex and fast etching is required. In the process of steel plate making, nitric acid etching solution is more commonly used.

• Developer: If the photosensitive platemaking method is used to make a pad printing steel plate, a developer is required. The developer is used to dissolve the uncured part of the photosensitive coating after exposure, so that the printed pattern appears. Different photosensitive materials may require different formulations of developers. For example, the developer composition commonly used for diazo photosensitive materials is different from the developer composition required for photopolymerization photosensitive materials. The FUJI photosensitive glue commonly available on the market belongs to diazo photosensitive glue. It uses FUJI developer water, which is a mixed solution of acidic substances and hydroquinone.

• Anti-etching materials:

• Photoresist: In the photosensitive platemaking method, photoresist is the key anti-etching material. It is coated on the surface of the steel plate. After exposure and development, the unexposed part of the photoresist is dissolved, and the exposed part is solidified on the steel plate to form an anti-etching layer to protect the pattern part from being etched. Common photoresists include diazo photoresist and photopolymer photoresist. Diazo photoresist has a fast photosensitivity and high resolution, while photopolymer photoresist is relatively simple to operate and has good storage stability.

• Dry film resist: Dry film resist is a pre-made thin film resist material that is attached to the surface of the steel plate by film pasting. It has good resolution and anti-etching performance and is suitable for making high-precision pad printing steel plates. When in use, the dry film is pasted on the steel plate, and after exposure and development, etching operations can be performed.

3. Auxiliary materials

• Grinding materials: Before making pad printing steel plates, the steel plates need to be ground to obtain good surface flatness and finish. Grinding materials include sandpaper (such as 800 mesh, 1000 mesh and other sandpapers with different mesh sizes), grinding paste, etc. Through step-by-step grinding, the oxide layer, scratches and other impurities on the surface of the steel plate can be removed, providing a good foundation for the subsequent plate making process.

• Cleaning materials: Cleaning materials are needed to remove impurities such as oil, dust and other impurities on the surface of the steel plate during the production process. Commonly used cleaning materials include organic solvents such as alcohol and acetone. These solvents can effectively dissolve oil and are highly volatile, which facilitates the rapid drying of the steel plate after cleaning. At the same time, after etching and development, it is also necessary to rinse the steel plate with clean water or special cleaning fluid to remove residual etching solution, developer and other chemicals.

• Experience materials: Steel plate production is currently mainly manual operation, and different operators will have different experience and methods. For example, in the etching process, tape will be used to surround a container on the surface of the steel plate so that the developer can be poured in for uniform development. After development, the etching process will use a brush to supplement the details.

FUJI Coating: 184USD/2lit

Brefie	Photoresist FUJI original costumes in 2LIT the green cans, in order to slightly yellow transparent liquid clay, with a slight pungent odor. Easy to apply, easy to dry and exposure.   One kind of malysite sensitization Emulsion. Film will be formed after coating onto pad plate by turning coating machine. it is important Chemicals in the process of making pad plate.
Usage	Thickness pad plate； Thin pad plate； Metal Plate
Package	Paper One can full of 2L ; Weight： 1.7kg; One paper case full 12 cans , Weight:21kg.
Store	Sahde, cooling and wentilate place; Expiration date: 2 Years
Parameter	Density：0.95； Volumn：2L; Sensitive vave length： 330-360NM
Advantage	Sensitive rapid, clear imaging, high leveling, the most widely used for domestic steel sensitive adhesive; High flatness, easy to form a layer of uniform thickness graphic; Photosensitive layer fineness, dot pretty smooth; High sensitivity, high tolerance; Developing rapid, high-quality text edges.
Usage	Sensitive adhesive can usually use that open cans, 250ml can with a part of the PP containers for sensitive adhesive, stir when used, drop a few drops on the steel surface by hand evenly rotating leveling; Use rotation, dipping, spraying the coating can be done perfectly; After drying the coating usually need to improve the photosensitive paste adhesion and corrosion resistance.
Reminding	Open carefully. use in a well-ventilated area. Avoid breathing mist or vapor, and contact with eyes, skin,  or clothing, Upon contact with eyes or skin, flush with large amount of water for at least 15 minutes. if swallowed, immedialytely drink water to dilute, call a physician.

FUJI Developping: 48usd/2Lit

Description:

    FUJI sensitive adhesive and supporting the use of a special enhancement of water, hydrogen peroxide as the main ingredient, is a colorless liquid with slightly pungent odor, usually in full bloom in the tin and black plastic containers. Flammable 

Usage︰

After Exposuring , Use developping liquid to remove the exposured sensitive gule.

Use Method︰

Development of water usage, different operators have different habits: 
1) Some operators, like the development of water into the developing tray, and then imaging plate into the developing trays; 
2) Some operators, like using brush dipped into the developing water development; 
3) Some operators tend to develop water dumped on the plate surface imaging.

Etching liquid:15usd/1Lit 

    Colorless transparent acidic fluid, usually in full bloom in the PP PE plastic bottle, is widely used in the corrosion of metal plates. Because of the metal plates and acid by-product of the reaction has some damage to the environment, with plenty of water when used as dilution. Do not directly into the sewage. 
        Configuration of domestic enterprises, water erosion, corrosion than the intensity of strong ferric chloride, so the network quality is not good. But the three green iron corrosion slow corrosion by hand, but not easy to control, so the more corrosive for the machine.

Usage︰

    After developping for pad plate, use this liquid to etch. There are two area, one is coverred with emilsion exposured, the other is Nudity. Etch will make it to cave.

Technical Parameter︰

• Density: 0.96g/m3;
• PH Range: 3；
• Package: 1 Lit;
• Brush etching;
• Time: 40 seconds

Production Advantage ︰

• Etch for Carbon steel;
• Protect the edge of drawing of plate when etching process;
• Easily controlled when etching process;
• Suitable for KC Emulsion and FUJI emulsion.

Use Method︰

    Dipping some etching liquid with brush amd move the brush on the surface of pad plate. calculate the time when etching.

Caution︰

     Avoiding contact with skin, or please wash with cleaning water.

Storage︰

   Store in shady and ventilation place. Avoiding Combustion source and insolation.

Product Image